There are many factors that determine the lifespan of a metal roofing machine, mainly including the following three points: 

1. The initial manufacturing quality of the roofing machine determines its lifespan. The tile-pressing machines provided by Shuoen use a large frame welded with 250-350 H steel, which is significantly stronger than the 200-250 section steel welded large frames commonly used by small factories. This increase in strength ensures that color-coated panels do not shift on the work table and eliminates the issues of needing to readjust after hoisting.

2. The choice of raw materials for the roofing sheet machine determines the lifespan of the thicker plates. A shaft diameter of 70, compared to 60-63, increases strength and does not present obstructions when pressing thicker plates, which affects their usage.

3. The material and forming method of the pressing rollers of the ibr roof sheet making machine. Many small manufacturers change the forming method to reduce costs, switching from solid wheels to segmented ones, which greatly impacts the lifespan of the products.

During use, the tile-pressing machine should undergo proper maintenance measures. Using the correct operating procedures and conducting regular maintenance can effectively improve production efficiency and quality while greatly extending its lifespan. Below are maintenance tips summarized by Shuoen regarding hydraulic components, hydraulic oil circuits, and filters.

Maintenance tips for hydraulic components:

1. After a new machine has been in use for one month, conduct a comprehensive inspection of the oil pipes for any deformation or damage. Replace any abnormal parts promptly.

2. After a new machine has been in use for two months, shut it down and ensure that the system is pressure-free. Inspect the connectors of the components and tighten any loose parts.

3. Regularly check all hydraulic components to prevent oil contamination from affecting normal equipment operation. Avoid using detergents during cleaning.

Maintenance tips for hydraulic oil circuits:

1. Ensure the system oil temperature does not exceed 70 degrees Celsius, as this can spoil the oil quality and damage components.

2. Use hydraulic oil specified by the manufacturer and do not change it arbitrarily.

3. Regularly change the oil after the new machine is put into use. Each oil change should involve cleaning the oil tank.

4. Regularly check the hydraulic oil level. If the level is below the sight glass, add hydraulic oil promptly.

Maintenance tips for filters:

1. Replace filters if the machine alarms or if the oil quality is unclean or other filter abnormalities occur.

2. Check and clean the air filter on the oil tank every three months, replacing it at least once a year.

3. Replace or clean the filter every time the oil is changed.

For comprehensive solutions in roofing sheet rollingforming machine, please contact Shuoen Machinery via email at admin@tsshuoen.com or WhatsApp at (+86) 19331572740 for immediate assistance!