Adding value for your metal plate products.

Today, let's take a detailed look at the various parts of the steel nail making machine and their functions!

The main accessories of the nail making machine include:

1.Mold knife parts are used to cut the wire to the required length and the formation of the nail tip. The material of the cutter is carbide, which has high hardness and wear resistance.

2.Punch, responsible for aligning one end of the wire into a nail head shape. The punch needs to be made of high-strength alloy steel.

3.Dies, for clamping wires and nail caps, are accessories for stamping operations. The mold is made of carbide.

4.The transmission part has a belt, which connects the motor and the spindle of the high speed steel nail machine to transmit power, and the belt adopts ordinary V-belt.

5.Gear, which plays the role of the main shaft driving the countershaft transmission, the gear is made of high-quality steel processing heat treatment.

6.Connecting rod, used for some specific transmission parts, such as feeding and tightening flushing mechanism, etc.

7.The feeding part is a wire feeder, which feeds the wire into the accessories inside the common nail making machine. The feeding stiffener wheel is made of carbide.

8.Adjustment screw for adjusting the eccentricity of the feed wheel to adapt to different nail length production requirements.

9.The electrical part has a motor to provide power for the nail making machine, and the power and speed of the motor should be selected according to the specifications and production requirements of the nail making machine.

10.Controller, which controls the start and stop of the motor.

11.Oil pump, used for refueling various transmission parts of the nail machine.

12.The other part is a bearing, which supports the various rotating parts of the nail machine and reduces friction and wear.

13.Screws and nuts, including bolts, nuts, coils, etc., are used to connect and secure various parts of the nail making machine.

14.Protective cover, mounted on the crankcase section of the nail maker to prevent lubricating oil from splashing onto the operator.

The above is an introduction to the main parts of the steel nail making machine and their functions. I hope it will be helpful to you!

For comprehensive solutions in roofing sheet rollingforming machine, please contact Shuoen Machinery via email at admin@tsshuoen.com or WhatsApp at (+86) 19331572740 for immediate assistance!