NEWS

HOME >> NEWS

Operating procedures for roll forming machine

1. The operator must be familiar with the performance and operating procedures of the machine.

2. Before starting the machine, check that there are no sundries and obstacles in and around the machine. Check whether all instruments and buttons are normal.

3. Before each operation, start the equipment for test run for 10 minutes. During the test run time, turn on the grease lubrication pump to fully lubricate all lubrication points. Do not start with load. 

4. During normal operation, add lubricating oil every 30 minutes to ensure the safe operation of the equipment.


1. The operator must be familiar with the performance and operating procedures of the machine.

2. Before starting the machine, check that there are no sundries and obstacles in and around the machine. Check whether all instruments and buttons are normal.

3. Before each operation, start the equipment for test run for 10 minutes. During the test run time, turn on the grease lubrication pump to fully lubricate all lubrication points. Do not start with load. 

4. During normal operation, add lubricating oil every 30 minutes to ensure the safe operation of the equipment.


1. The operator must be familiar with the performance and operating procedures of the machine.

2. Before starting the machine, check that there are no sundries and obstacles in and around the machine. Check whether all instruments and buttons are normal.

3. Before each operation, start the equipment for test run for 10 minutes. During the test run time, turn on the grease lubrication pump to fully lubricate all lubrication points. Do not start with load. 

4. During normal operation, add lubricating oil every 30 minutes to ensure the safe operation of the equipment.

+86 13780503368 +86 13780503368 admin@tsshuoen.com